Manual Comandos Siemens Hipath 4000

This list contains the full set of commands that the Siemens HiPath 4000 EMS system canhandle. You only need to remember these commands so that you can do something fast andsmooth if something unexpected happens.

In this case, the Siemens card management mode is started, and then the PIN of the cards isentered. After that, the card management mode is blocked. This can be done to physicallyblock re-deployed cards. If not blocked, they will be discarded at the next cardmanagement change. The ‘card management mode is blocked’ is used in case you want torestart the Siemens cards, for example, after a configuration change.

With the ‘card management’ module, you can remotely manage some Siemens cards.For example, if you need to remotely disable phone linecard reader 5 or card 4, or re-activate a newly changed card 5, this cardmanagement is the perfect way to do it.

Below you can find a list of AMO commands and a general description forthat command for the Siemens HiPath 4000 IP PBX. Many of these commands are used with other Siemens HiPath versions as well as HiCom and can be used as aquick reference sheet for technicians.

Below you can find a list of AMO commands and a general description forthat command for the Siemens HiPath 4000 IP PBX. Many of these commands areused with other Siemens HiPath versions as well as HiCom and can be used as aquick reference sheet for technicians. 7211a4ac4a